How to use Spiderman machine embroidery design. New idea.
Author: Diixie Ball (USA) Author wrote: "I have a Husqvarna SE embroidery machine and 4D Husqvarna professional software. For the design with just the top of Spiderman I went into the edit software and cut the design where I wanted it and then I saved the top part. On one of the tops I changed the colours so I would have the new version of Spiderman (black) I then mirrored imaged the design and rotated it. I added the Spiderman text and combined everything. Then I rotated the whole design so it was on an angle I have done it both ways straight and on the angle.
For the 2 full Spiderman's I just changed the colours and saved it under a new name then I mirrored imaged it and combined the two of them. I also added text. The Spiderman machine embroidery designs stitched out very well on cotton material with a tear away stabilizer. I have also done it on fleece with a cut away permanent stabilizer but for the fleece I decreased the density in my Husqvarna 4D edit software by 20% this made the stitches just a little less dense.
For the fleece blanket designs I use a cut away stabilizer that is used for T-shirts it is light and soft but has no stretch so it keeps the stitches from breaking I also use a plastic top coat that is torn off after the design is complete so the stitches don't get pulled into the material. I always use rayon thread with a fine cotton bobbin thread and an 80 size needle. I hope this is what you needed. I am making 4 new blankets using your designs will send you pictures when I'm done.
Thanks Dixie Have a GREAT DAY Dixie"
Instant Download
The idea for the use of Spiderman design
